000 | nam | |
001 | 2210080240637 | |
005 | 20140625154307 | |
008 | 950304s1993 bnka m FB 000a kor | |
040 | ▼a221008 | |
100 | ▼a이천우 | |
245 | 00 | ▼a일액습기경화형 Polyurethane접착제 제조에 있어서 Isocyanate와 Polyol의 원료에 따른 영향/▼d李天雨 著. - |
260 | ▼a부산:▼b동아대학교,▼c1993. - | |
300 | ▼a38장.:▼b삽도;▼c27cm. - | |
502 | ▼a학위논문(석사)-▼b동아대학교 대학원▼c화학공학과▼d94년2월 | |
520 | ▼b영문초록 : The prepolymers which have lots of properties and formations of polyols/diisocynates influence the manufacture of of polyurethane adhesives. The following conclusions were obtained through experimental analysis. 1. The optimum molecular weight of prepolymer was from about 1.9 × 10^(4) to about 4.0 × 10^(4). 2. The high consumed [ -NCO % ] of prepolymers obtained from MDI (4, 4'-methylene di-phenyl isocyanate ) and PTMG (poly tetra methylene ether glycohol). 3. Shelf life of prepolymer from masuring the tack-free time of curing mechanism was in the order as follows : (1) Diisocyanates : MDI+TDI > TDI > MDI (2) Polyols : PTMG+PPG > PTMG 4. The optimum formations of prepolymer was obtained in TDI/PTMG and MDI+TDI/PTMG system. 5. Effects of DBTL(wt%) on torque and tensile strength of prepolymers were shown Fig. 10, 11 and 12. 6. Each of prepolymers have obtained the optimum thermal stabilization. | |
650 | ▼a폴리우레탄접착제 | |
856 | ▼adonga.dcollection.net▼uhttp://donga.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000002147410 | |
950 | ▼aFB | |
950 | ▼a비매품▼b₩3,000▼c(추정가) |
Registration no. | Call no. | Location Mark | Location | Status | Due for return | Service |
---|---|---|---|---|---|---|
Registration no.
E0512629
|
Call no.
571.89 이813일
|
Location Mark
D
|
Location
부민학위논문실
|
Status
대출불가 (소장처별 대출 불가)
|
Due for return
|
Service
|
Registration no.
E0512630
|
Call no.
571.89 이813일 =2
|
Location Mark
D
|
Location
부민학위논문실
|
Status
대출불가 (소장처별 대출 불가)
|
Due for return
|
Service
|
Registration no.
E0535491
|
Call no.
571.89 이813일 =3
|
Location Mark
D
|
Location
부민학위논문실
|
Status
대출불가 (소장처별 대출 불가)
|
Due for return
|
Service
|