UHF파를 이용한 RFID의 전파 시스템에 관한 연구 / A Study on UHF Wave Propagation System of RFID
- Resource Type
- Dissertation/ Thesis
- Authors
- 이붕 / LI PENG
- Source
- Subject
- UHF파
RFID
- Language
- English
The non-symmetry Transmission of UHF(Ultra High Frequency) RFID(Radio Frequency IDentification) determines the readers and tags encoding-modulation mode. The UHF RFID encoding-modulation types of the first and second generation standards are compared and their differences are pointed out. As the RF(Radio Frequency) front-end is decided by encoding-modulation and the reader must transmit and receive synchronously. The front-end needs for Tx/Rx is separation which can be used circulators and directive couplers. Since these two kinds of isolation are non-ideal, the interference from the transmitter is introduced into the receiver more or less, the main component of these disturbances is the reader? local oscillator phase noise. In the thesis, the reader? RF front-end I/Q signals and the signal to interference ratio in I/Q channels are discussed. MoM(Method of Moment) is a kind of computational electromagnetics methods. The antenna surfaces of tags and readers are divided into a number of small elements and the scattering field of a tag? antenna can be calculated with the induced surface current on these small surface elements. The underlying working principle of load modulation is presented in the changing surface current on a tag antenna. With the MoM model, the tag antenna Radar Cross Section is calculated. UHF RFID is mainly used indoor and the ray-tracing method and the theory of statistical channel are used for modeling RFID channel.
UHF RFID의 비대칭작업원리가 리더와 라벨바코드-조정방식을 결정한다. 본연구는 기존 UHF RFID 표준바코드와 신규UHF RFID 표준바코드의 조정방식의차이를 비교함으로써 이들의 발전과정을 연구하는데 목적을 두었다. 바코드의 조정방식이 RF(Radio Frequency)전단부를 결정하기 때문에UHF RFID 시스템에서RF전단부로 TX/RX에 대한 분리가 필요하며 분리기는 변압기와 방향성 결합기를 사용할 수 있다. 변압기와 방향성 결합기는 차단효과의 한계로 인하여 접속포트가 방사포트의 일정한 영향을 받게 된다. 주요 원인은 READER LO의 페이즈소음이 라벨의 미역한 반사신호의 검사에 영향을 미치기 때문이다. 본 연구에서는 RF전단부의 I/Q 두가지 신호를 출발점으로 비교분석하여 리더설계에서 유의해야 할 부분을 밝혔다. MoM(Method of Moment)는 전자학을 계산하는 방법이다. 본 연구는MoM방법을 이용하여 라벨과 리더의 안테나 표면을 여러 개의 부분으로 분할하여 서로 다른 상태의 라벨안테나 부분표면전류의 부하조정을 계산함으로써 라벨안테나표면의 전체 감응전류를 파악하고 라벨안테나의 난반사를계산하여 UHF RFID의 역방향의 원리에 대하여 분석하였다. 또한 본 연구에서는라벨안테나의MoM모델링 설정을 통하여 라벨안테나의RCS(Radar CrossSection)모델링 계산과 분석방법에 대하여 논의하였다. UHF RFID는 실내에서 주로 사용되고 있으므로 본 연구는 방사선 추적법 과 통계정보 채널 이론을이용하여RFID의 정보 채널에 대하여 모델링을 설정하였다. 방사선 추적법은 실내의 전송환경을 정확하게 모델링할 수 있다. 본 연구는 직사와 반사의 두가지상황에서UHF RFID신호가 실내에서의 전송차이점에 대하여 분석하였으며 상기여러 가지 요소에서의 방사선 추적법 RFID 정보 채널 모델링을 제시하였다.