The HFFB(High Frequency Force Balance) technique can easily obtain the shear force, the overturning moment, and the torsion moment ofbuilding. However, there is a blind point that the vertical profile cannot be grasped. The actual wind load does not act as the same forcedepending on the height direction of the building. Therefore, the shear force at the base of the building calculated through the HFFBtechnique should be appropriately distributed vertically. The background wind loads are generated by the wind, and it is reasonable to followthe vertical profile of the fluctuating wind force coefficient. In this study, the vertical profile of the fluctuating wind force coefficient wasinvestigated through the wind pressure test. The PIM(Pressure Integration Method) was used to convert the wind pressure data obtainedthrough the wind pressure test into the wind force data. The study model are the rectangular building with aspect ratios of 0.2, 0.25, 0.33,0.5, 0.66, 1, 1.5, 2, 3, 4, 5. The vertical profile of the fluctuating wind force coefficient for along-wind direction, across-wind direction,torsional direction according to the change of the aspect ratio was analyzed. As a result, it was confirmed that the vertical profile of thefluctuating wind force coefficient tends to become relatively constant as the wind direction goes from 0° to 45°(When wind direction andstructural axis do not coincide).
풍력실험은 건축물의 밑면전단력, 밑면전도모멘트, 밑면비틀림모멘트를 쉽게 구할 수 있다. 그러나, 연직분포를 파악할 수 없다는 맹점이 존재한다. 실제 풍하중은 건축물의 높이방향에 따라 동일한 힘으로 작용하지 않는다. 따라서, 풍력실험을 통하여 산출한 건축물의 밑면전단력을 적절하게 연직으로 분포시켜야 한다. 비공진풍하중의 경우 바람에 의해 발생하는 것으로 변동풍력계수의 연직을 따르는 것이 적절하다고 볼 수 있다. 본 연구에서는 풍압실험을 통해 변동풍력계수의 연직분포를 파악하고자 하였다. 풍압실험으로 구한 풍압데이터를 풍력데이터로 변환하기 위해 풍압적분법을 활용하였다. 연구모델은 변장비가 0.2,0.25,0.33,0.5,0.66,1,1.5,2,3,4,5인 사각형 건축물이다. 변장비 변화에 따른 풍방향, 풍직각방향, 비틀림방향에 대한 변동풍력계수의 연직분포를 분석하였다. 그 결과, 풍향이 0°에서 45°로 변할수록 (풍향과 주축이 일치하지 않는 경우) 변동풍력계수의 연직분포가 비교적 일정한 것을 확인하였다.