Tremor is one of the most common movement disorders with the highest prevalence in the upper limb. Apart from medication or surgery, the mechanical suppression of the involuntary movement with an orthosis can be used as alternative treatment. Here we propose a controlled energy dissipating suppression orthosis using a mechanical brake. For this approach, we focused on improved wearability with voluntary movement preservation and ergonomics while providing tremor suppression. The novelty of this orthosis is the decentralization of the tremor suppression mechanism and the integration of textiles in the orthosis structure. We performed computational and test bench simulations of a controlled two-state brake with a 1D human model to optimize the brake duration and timing. The objective was to optimize the trade-off between tremor suppression and voluntary movement suppression. The textile-integrated prototype, with the optimized parameter, was validated in a proof-of-concept case study with a tremor-affected person performing activities of daily living. With the optimized parameters, we achieved a tremor suppression of 78.8%, 66.5%, and 40.8% for the simulation, test bench, and case study, respectively as measured by the change in power spectral density (PSD) at the tremor frequency peak. While minimizing the voluntary movement suppression in the simulation and test bench by introducing the trajectory distance as new validation method (23.7% and 31.2%), no voluntary movements suppression was measured in the case study using PSD analysis. Our new orthosis has the potential to become a daily wearable device that can improve the quality of life for tremor-affected people.