휘발성 유기화합물(Volatile Organic Compounds, VOCs)은 실내 공기 오염 물질 중 한 종류이고 톨루엔은 그 중 대표적인 화합 물질이다. 톨루엔의 발생 원인은 많고 노출이 되면 단기간에 질환에 걸릴 수 있다. 광촉매는 톨루엔 제거 방법 중 효과적인 방법일 때문에 공기 오염 처리 분야에서 사용되는 방법이 되고 있다. 그 중 광촉매에 TiO2는 화학적으로 안정하고, 반응 속도가 빠르고, 사람들에게 해가 없고, 가격이 저렴해서 점점 VOCs 처리에 응용되고 있다.본 연구는 광촉매 반응의 메커니즘을 분석하고 L-H 반응율속 방정식을 통해 톨루엔 제거 과정을 묘사하였다. 실험은 설계된 광촉매 반응기를 이용하여 공기 습도, 공기 속도, 톨루엔 입구 농도, UV LED 조사량에 따라 UV 조사량 측정, 필터 풍압 측정 및 톨루엔 제거를 진행하였다. 또한, 전산해석은 모델을 만들어 필터 표면의 UV 조사균일도, 반응기 내부 유동장 및 톨루엔 제거의 시뮬레이션을 진행하였다.실험 결과로 습도는 광촉매 반응 효율에 대한 영향이 큰 것을 확인하였고, 톨루엔 입구 농도가 증가하면 톨루엔의 제거 량이 증가하지만 제거 효율은 떨어지는 것을 확인하였다. 톨루엔 제거 효율은 최소 3.1%, 최대 28%로 확인하였다. 전산해석 연구 결과로 필터 표면의 UV 조사 균일도는 87 %로 나타났고, 반응기 내부 공기 유동이 균일한 것을 확인하였고, L-H 반응 모델은 본 연구에서 광촉매 반응에 대해 적절한 것으로 판단된다.
Toluene, a typical Volatile Organic Compound (VOC), is one of indoor air pollutants. Toluene pollution comes from everywhere of humans daily life and exposure in toluene for a short time can result in disease such as headache, dizziness, confusion. The photocatalyst is an effective method of removing toluene. In previous studies, they used nano TiO2 particles for photocatalysts in VOCs processing due to its chemical stability, fast reaction rate, non-toxic, low price.This study analyzed the mechanism of photocatalytic reaction and described the toluene removal process through the equation of L-H reaction rate. Experiments were conducted by using the designed photocatalytic reactor to measure UV radiation, differential pressure in filter and the toluene removal efficiency as a function of air humidity, air velocity, toluene concentration of the reactor entrance and UV radiation. The computational analysis was performed to simulate the UV radiation on the filter surface, the flow field in the reactor and the toluene removal.As a result of the experiments, it was confirmed that the humidity had a large effect on the photocatalytic reaction efficiency. While the amount of the toluene removal increased, the toluene removal efficiency decreased in case of increasing the toluene concentration of the reactor entrance. The maximum and minimum toluene removal efficiency was at 28% and 3.1%, respectively. As a result of computational analysis, the uniformity of UV radiation on the filter surface was at 87%, and it was confirmed that the air flow in the reactor was uniform, and the L-H reaction model was considered as appropriate model for the photocatalytic reaction in this study.