Effect of Solder Volume on Shear Strength between Sn-3.0Ag-0.5Cu Solder and Cu Metallization
- Resource Type
- Conference
- Authors
- Shihua, Yang; Pengrong, Lin; Yanhong, Tian; Chunqing, Wang; Le, Liang; Qian, Wang
- Source
- 2007 8th International Conference on Electronic Packaging Technology Electronic Packaging Technology, 2007. ICEPT 2007. 8th International Conference on. :1-4 Aug, 2007
- Subject
- Engineered Materials, Dielectrics and Plasmas
Components, Circuits, Devices and Systems
Metallization
Soldering
Testing
Electronics packaging
Microstructure
Grain boundaries
Surface cracks
Canning
Electron microscopy
Mechanical factors
- Language
Shear behavior of Sn-3.0Ag-0.5Cu solder joints on ball grid array substrates was investigated with different solder volumes and shear speeds to study the solder volume effect on shear properties. Both solder volume and shear speed were found to have strong effect on the shear strength. The shear force decreases obviously with the decrease of the solder volume due to the significant decrease of loaded area, while the shear strength has reverse trend. The shear strength increases sharply with the decrease of solder volume as a result of the discrepancy of interfacial reaction and microstructure. And the shear strength increases rapidly with the increase in shear speed due to the limited grain boundaries or interphase boundaries sliding and dislocation movement. After the shear test, fracture surfaces were investigated by canning electron microscopy equipped with energy dispersed x ray and it was found that the fracture mode of as-reflowed solder joints was primary ball cut within the bulk solder near the interface with a ductile rupture. The results suggest that even if the solder shear tests showed the same fracture mechanism, solder volume still has great effect on the shear properties at different shear speeds.