It is a fact that the number of sites applying external support such as anchor or soil nailing is inevitably increasing because of Wide excavation area, Internal support difficulty, Interference due to construction of main structure, delayed construction in the application of the excavation earthwork method according to the enlargement of the structure and development of the deeper underground space.In this paper, 2 dimensional elasto - plastic analysis and 3 dimensional finite element analysis results were compared with the measured results considering step by step excavation in the field for Study on 3 Dimensional Behavior for the coner of Anchored Earth Retaining Wall. As a result of the comparison of horizontal displacement, field measurement results show that the magnitude and distribution pattern of horizontal displacement is different from the 2 dimensional elasto - plastic analysis result but similar to those of the 3 dimensional finite element analysis.These results are due to various factors such as differences in interpretation methods, changes in depth of excavation per construction stage, delays in the installation of support, and lack of anchor tension. and It is considered that the influence of the earth pressure on the sloping back ground and the 3 dimensional Behavior For the coner of anchored earth retaining wall.Therefore, it is considered that there is a need to study on the influence of the slope ground and the 3 dimensional behavior for the coner of anchored earth retaining wall In addition, it is required to make reasonable selection of location and type of field measurement for reverse analysis and precise construction in accordance with the design content.Keywords: coner area, 3 dimensional behavior, coner of anchored earth retaining wall
구조물의 대형화 및 대심도화에 따른 굴착 흙막이 공법 적용에 있어서 장지간의 굴착 영역 및 비정형 부지의 내부 지보 곤란 문제, 본 구조물 시공에 따른 간섭 및 공기 지연 문제 등으로 인해, 앵커나 쏘일 네일링과 같은 외부 지보의 적용이 불가피한 현장들이 늘어나고 있는 것이 현실이다. 본 논문에서는 흙막이 우각부의 3차원적 거동 연구를 위해, 현장의 단계별 굴착을 고려한 2차원 탄소성해석 및 3차원 유한요소해석을 수행하여, 계측 결과와 비교 분석하는 과정을 수행하였다. 수평 변위 비교 검토 결과, 현장 계측 결과는 수평 변위의 크기나 분포 양상이 2차원 탄소성해석 결과와 차이가 있는 것으로 나타났으며, 3차원 유한요소해석 결과와는 그 크기에서는 차이를 보이나, 깊이별 변위의 분포 양상이나 변화의 추이 측면에서는 유사한 것으로 나타났다. 또한, 평면변형 조건에서의 2차원 탄소성해석 결과와 계측 결과는 변위 분포 양상에서는 유사하나, 시공시 불확실성 요인 등으로 인해 그 크기에서는 다소 차이가 있는 것으로 나타났다. 이러한 결과는 기본적으로 해석 방법의 차이, 시공 단계별 굴착 깊이 변화, 지보재 설치 시기의 지연, 앵커 긴장력 도입 부족 등 다양한 불확실성 요인에 기인한다고 할 수 있으며, 3차원 수치해석 결과가 계측치와 유사한 깊이별 분포 및 변화의 추이를 나타내는 요인으로는 우각부 배면의 3차원적 거동을 비교적 잘 반영하고 있기 때문으로 판단된다.따라서 향후 흙막이 설계에 있어서, 앵커지지 흙막이 벽체 우각부의 3차원적 거동에 대한 검토와 연구가 지속적으로 수행되어야 할 필요성이 있다고 판단되며, 아울러 시공단계에는 설계 내용에 부합된 정밀 시공과 역해석을 위한 계측기 위치 및 종류의 합리적 선정 등이 요구된다.