This paper presents an experimental research to investigate the feasibility of applying induction heating to concrete containing a magnetic fine aggregate. Rapid-cooled steel slag was used as the magnetic material which substituted a portion of fine aggregate contents in the concrete. Volume-replacement rates of 0 % and 40 % were selected and denoted as PS00 and PS40. To evaluate the influence of the induction heating on concrete mechanical properties, compressive strength and elastic modulus were measured. The effects of specimen size and substitution of fine aggregate on the mechanical properties were also investigated to rationalize the evaluation. Induction heating had little influence on the mechanical properties of PS00. Compared to PS00, PS40 without induction heating had approximately 40.0~56.7 % increase in compressive strength and elastic modulus due to the substitution effect. However, after induction heating, the compressive strength of PS40 at 28 days was reduced by 15.3 % and the elastic modulus of PS40 showed reduction in the range of 11.9~21.0 % for all ages (7, 14, 28 days).
본 논문은 유도가열을 이용한 자성물질을 가열하는 원리를 콘크리트에 적용하기 위한 실험적 연구를 포함하고 있다. 자성물질로 급냉 자성슬래그를 선정하고 콘크리트 배합에 사용하였으며 자성물질을 함유하는 콘크리트의 유도가열에 따른 역학적 특성에 대해 평가하기 위하여 급냉 자성슬래그 치환율 0 %(PS00)와 40 %(PS40)인 콘크리트 배합에 대하여 압축강도, 탄성계수를 측정하였다. 추가로 유도가열 이외의 콘크리트의 역학적 특성에 영향을 주는 인자인 시편의 크기, 잔골재 치환에 따른 역학적 특성 변화에 대해서도 평가를 수행하였다. 그 결과 유도가열을 수행하지 않은 경우 PS00에 비해 PS40이 압축강도 및 탄성계수가 약 40.0~56.7 % 상승하지만 유도가열을 수행하는 경우 PS00은 변동이 없었고 PS40은 재령 28일 압축강도가 15.3 % 감소, 탄성계수는 모든 재령에서 11.9~21.0 % 저감되는 효과를 보였다.