International audience; The gas flows through the low permeable porous media are of great interest, especially in vacuum technology for filtering, separation processes, protection, and flow control. It can combine a high mass flow rate and a high level of rarefaction. The transient experimental technique, developed previously for the mass flow rate measurements through the microchannels (M. Rojas Cardenas et al., Phys. Fluids, vol. 23, p. 031702, 2011), is generalized to obtain the permeability and conductance directly from the pressure variation measurements. The present experimental methodology, allowing for step by step data verification, leads for higher accuracy than the similar and commonly used method such as "pulse-decay" techniques (W. F. Brace et al., Int. J. Rock. Mech. Min. Sci, vol. 5, no. 415-426, 1968). The measured data are fitted according to the exponential function with the pressure relaxation time as a single fitting parameter. The permeability and conductance of the sintered stainless steel microporous medium are measured for different gases. By using the methodology proposed in (M. V. Johansson et al., Int. J. Heat and Mass Transfer, vol. 142, p. 118412, 2019) the characteristic pore size of the sample was determined to be equal to 1.5 micrometers. It was found that free molecular flow constant conductance is achieved at a pressure below 30 mbar for helium. This property makes this kind of porous media particularly suitable as a leak element by taking advantage of the constancy of conductance in the free molecular flow regime, for example, for calibration of ionization gauges or mass spectrometers (H. Yoshida et al., Measurement 45(10), 2452–2455 (2012)].