Structural behavior of FRCC layered deep beams reinforced with GFRP headed-end bars
- Resource Type
- Authors
- Ahmed G. Bediwy; Ehab El-Salakawy; Karam Mahmoud
- Source
- Engineering Structures. 243:112648
- Subject
- Materials science
0211 other engineering and technologies
020101 civil engineering
02 engineering and technology
Bending
Fibre-reinforced plastic
Span (engineering)
0201 civil engineering
Basalt fiber
021105 building & construction
Arch
Composite material
Ductility
Reinforcement
Beam (structure)
Civil and Structural Engineering
- Language
- ISSN
- 0141-0296
In this study, seven concrete deep beams reinforced with glass fiber reinforced polymer (GFRP) headed-end bars were constructed and tested to failure. The beams had a rectangular section of 250 mm in width and 590 mm in depth with overall span of 1,390 mm and were tested under three-point bending loading. The main test variables were the longitudinal reinforcement ratio and the incorporation of fiber-reinforced cementitious composite material in the tie zone. The arch action mechanism developed in all specimens as substantiated by the measured strains along the tie length. In addition, analysis of test results showed that the incorporation of basalt fiber pellets or steel fibers in the tie zone of the beam improved the behavior including the ductility and the load carrying capacity. It was also found out that the provisions for strut-and-tie model in the Canadian codes for FRP-RC structures and the American code for steel-RC structures yielded reasonable predictions to the load capacity of deep beams.