Severe periodontitis affects nearly 1 billion individuals worldwide, highlighting the need for early diagnosis. Here, an integrated system consisting of a microfluidic chip and a portable point-of-care (POC) diagnostic device is developed using a polymethyl methacrylate (PMMA) chip fabrication and a three-dimensional printing technique, which is automatically controlled by a custom-designed smartphone application to routinely assess the presence of a specific periodontitis biomarker, odontogenic ameloblast-associated protein (ODAM). A sandwich-type fluorescence aptasensor is developed on a microfluidic chip, utilizing aptamer pair (MB@OD64 and OD35@FAM) selectively binding to target ODAM. Then this microfluidic chip is integrated into an automated Internet of Things (IoT)-based POC device, where fluorescence intensity, as a signal, from the secondary aptamer binding to ODAM in a sandwich-type binding reaction on the microfluidic chip is measured by a complementary metal oxide semiconductor (CMOS) camera with a 488 nm light-emitting diode (LED) excitation source. Obtained signals are processed by a microprocessor and visualized on a wirelessly connected smartphone application. This integrated biosensor system allows the rapid and accurate detection of ODAM within 30 min with a remarkable limit of detection (LOD) of 0.011 nM under buffer conditions. Clinical application is demonstrated by successfully distinguishing between low-risk and high-risk individuals with 100 % specificity. A strong potential in the translation of this fluorescence-based microfluidic aptasensor integrated with an IoT-based POC system is expected to be employed for non-invasive, on-site, rapid, and accurate ODAM detection, facilitating periodontitis diagnosis.
Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
(Copyright © 2024 Elsevier B.V. All rights reserved.)