Library Catalog

>>
Library Catalog
>
000 nam k
001 2210080120417
005 20140708141624
007 ta
008 870523s1986 bnka FB 000a kor
040 a221008
041 akorbeng
056 a552.324
100 a김웅장
245 00 a1050 알루미늄의 切削特性에 미치는 切削條件의 影響 /d金雄章
260 a부산:b東亞大學校 大學院,c1986
300 a37 p.:b삽도;c27 cm
502 a학위논문(석사)--b東亞大學校 大學院:c機械工學科,d1986. 2
520 b영문초록 : This study has been carried out to clarify specific cutting force, chip shape and surface roughness. They were varied by cutting speed, feed and tool rake angle in the turning cutting experiment of 1050 Aluminium material with using tungsten carbide tools (G_(2)). The results obtained in this study are as follows; 1. Specific cutting fore decreases with the increase of cutting speed and feed. 2. Discontinuity of specific cutting force exists, and ocurrs at the low speed region as back rake angle is small. The range of discontinuity is being short with the increase of back rake angle. 3. According to the increase of cutting speed and feed, the shape of chip is changed into shear type, tear type, tear plus flow type, flow type in turn. 4. Surface roughness is good at the cutting speed, 500m/min and is nearly independent of the back rake angle.
650 a절삭가공
856 adonga.dcollection.netuhttp://donga.dcollection.net/jsp/common/DcLoOrgPer.jsp?sItemId=000002141558
950 aFB
950 a비매품b₩2400c(추정가)
1050 알루미늄의 切削特性에 미치는 切削條件의 影響
Material type
학위논문 동서
Title
1050 알루미늄의 切削特性에 미치는 切削條件의 影響
Author's Name
Publication
Physical Description
37 p: 삽도; 27 cm
학위논문주기
학위논문(석사)-- 東亞大學校 大學院: 機械工學科, 1986. 2
Keyword
영문초록 : This study has been carried out to clarify specific cutting force, chip shape and surface roughness. They were varied by cutting speed, feed and tool rake angle in the turning cutting experiment of 1050 Aluminium material with using tungsten carbide tools (G_(2)). The results obtained in this study are as follows; 1. Specific cutting fore decreases with the increase of cutting speed and feed. 2. Discontinuity of specific cutting force exists, and ocurrs at the low speed region as back rake angle is small. The range of discontinuity is being short with the increase of back rake angle. 3. According to the increase of cutting speed and feed, the shape of chip is changed into shear type, tear type, tear plus flow type, flow type in turn. 4. Surface roughness is good at the cutting speed, 500m/min and is nearly independent of the back rake angle.
관련 URL

Holdings Information

Call no. : 552.3 김67일
RReservation
MMissing Book Request
CClosed Stack Request
IInter-Campus Loan
CPriority Cataloging
PPrint
Registration no. Vol. Copy Location Mark Location Status Due for return Service
Registration no.
E0315281
Vol. Copy
Location Mark
D
Location
부민학위논문실
Status
대출불가 (소장처별 대출 불가)
Due for return
Service
Registration no.
E0533686
Vol. Copy
=2
Location Mark
D
Location
부민학위논문실
Status
대출불가 (소장처별 대출 불가)
Due for return
Service

Book Overview

Full menu